To round clocking to a set increment in time.

  1. Navigate in WorkforceTNA to Shift Setup > Daily Rules.
  2. Select the Daily Rule. 
  3. Click on the Rounding Tab.


 



-Rounding up will always move their clocking time up to the nearest number specified.

For example if someone clocked on at 0703 with the settings set to Round up to 15. It would move their time to 0715.

 

-Rounding down will always move their clocking time down to the nearest number specified.

For example if someone clocked on at 0714 with the settings set to round down to 15. It would move their time to 0700.

 

-Mid-Point rounding will always move their clocking to the nearest number specified.

For example if someone clocked on at 0706 with the settings set to mid point rounding to15. It would move their time to 0700.


Note: If you use decimal time format the rounding will apply in hour:minute and then convert to decimal in the timesheets.



Mousing over the time will show the original time. 

In this case a 15 minute mid point rounding as rounded 07:06 down to 07:00.